A PS5 SSD must be an M.2 NVMe drive with PCIe Gen4x4 and cooling. Sony recommends a read speed of at least 5,500 MB/s. This comes from PlayStation Support. In our view the heatsink is the easiest place to go wrong: the drive doesn't have one, or the one it has is too tall. Below you will find Sony's requirements, along with what to check before ordering.
Key points
- Sony requires M.2 NVMe, PCIe Gen4x4, 250 GB–8 TB and cooling.
- The total height with the heatsink can be 11.25 mm at most.
- You can't play PS5 games from a USB drive. USB only works as storage here.
- M.2 SATA drives don't work in the console.
What does Sony require from a PS5 SSD?
The table comes from PlayStation Support, read on 4 November 2026.
| Item | Sony's requirement |
|---|---|
| Interface | M.2 NVMe (Key M), PCI-Express Gen4x4 |
| Capacity | 250 GB–8 TB |
| Size | 2230, 2242, 2260, 2280, 22110 |
| Width with cooling | max. 25 mm |
| Height with cooling | max. 11.25 mm (8.0 mm above the board, 2.45 mm below it) |
| Sequential read speed | 5,500 MB/s or faster recommended |
| Cooling | required |
Meeting these requirements doesn't give you full certainty. Sony says it can't guarantee that every drive meeting the specification will work. It also can't guarantee that every game performs as it does on the built-in drive, even above 5,500 MB/s. If a game has problems on the M.2 drive, move it to the console's internal storage.
An extra drive works in the PS5 and the PS5 Digital Edition. You can download, copy and run PS5 and PS4 games on it, as well as media apps.
Does a PS5 SSD need a heatsink?
Yes. Sony says an M.2 drive in a PS5 needs a cooling structure such as a heatsink, and warns against using it without one. You have two routes: a drive with a built-in heatsink, or a separate heatsink you fit yourself. Sony adds that single-sided heatsinks are easier to fit.
Choose a drive with a factory heatsink if you don't want to assemble anything. Sony notes that heatsink sizes vary widely, while most drives without built-in cooling fit the slot. So the trouble usually starts with the heatsink. One that is a millimetre too tall means a drive you can't install, so check the height in the specification of the exact model. If it isn't listed, Sony suggests choosing another product or asking the seller or maker.
PCIe 4.0 or 5.0 for PS5?
PCIe 4.0 is enough. Sony lists only Gen4x4 in its requirements and doesn't describe PCIe 5.0 drives. In our view, paying more for Gen5 makes sense in a newer PC, not in a PS5. We feel the same about read speeds far above 5,500 MB/s: Sony doesn't promise faster games for them, so that money is better spent on capacity.
How much capacity do you need?
What matters is how many games you want installed at once. Big AAA titles often take tens of gigabytes, and the heaviest pass 100 GB. So:
- 1 TB is a sensible start if you play a few titles at a time and delete finished ones.
- 2 TB suits a library with many large games.
- 4 TB and more makes sense if you never want to delete anything and accept the price.
You can move games freely between console storage, the M.2 drive and USB storage, so your first choice of storage isn't permanent. You can also move the drive to another PS5, as long as you sign in to the same account on both consoles.
USB drive or M.2 for PS5?
A USB drive doesn't replace M.2. According to Sony, you can't play PS5 games directly from USB extended storage, so you copy them to console storage or an M.2 drive first. PS4 games do run from USB.
A cheap USB drive therefore makes sense as storage for games you rarely return to. If you want more titles ready to play, you need M.2.
Three mistakes when buying a PS5 SSD
- A drive with no heatsink in your cart. A cheap model without one needs separate cooling. Add that to the price and check the dimensions.
- M.2 SATA instead of NVMe. The two look similar, but SATA won't work. Look for NVMe and PCIe Gen4 in the name.
- Too little capacity to start with. Replacing a drive means moving games and fitting it again, so 500 GB rarely makes sense today.
The last point is our opinion, not Sony's rule. The console accepts drives from 250 GB.
How do you install an M.2 drive in a PS5?
You need a #1 Phillips screwdriver and a well-lit table. Sony's full instructions are on its support page, and the main steps are:
- Update the console's system software to the latest version.
- Turn the console off and unplug all cables.
- Touch a grounded metal object to discharge static electricity.
- Fit the drive by following Sony's instructions for your console model.
- Start the console and format the drive. Formatting deletes all data on it.
Don't turn off the power while formatting or saving data. Sony warns that this can damage the drive.
Want to compare models? See NVMe SSDs at EuroTech and check PCIe, read speed and heatsink height for each one. You can pay by card or with crypto. Building a PC as well? Read our guide to the best graphics card for gaming.
Frequently asked questions
Does a 2230 drive fit a PS5?
Yes. Sony lists 2230 alongside 2242, 2260, 2280 and 22110. Just check that the total dimensions with cooling stay within the limit.
What is the largest SSD a PS5 supports?
Sony states 250 GB to 8 TB for M.2. The same 8 TB limit applies to USB extended storage.
Does an M.2 SATA drive work in a PS5?
No. Sony says plainly that M.2 SATA SSDs aren't supported.
Do these requirements apply to PS5 Slim and PS5 Pro?
Yes. Sony's support page has one requirements table and groups the Pro with the Slim in its fitting instructions, under the CFI-2000/7000 model group. Check the model number on your console and follow the matching instructions.
Will games run faster on an M.2 drive?
Sony doesn't promise that. An extra drive adds space for games. It doesn't speed up the console.
Written by the EuroTech editorial team, an electronics shop. We checked the data on 4 November 2026 in the sources linked in the text.